Руководство FreeBSD

         

Настройка X Сервера (Configure X Server)


Чтобы использовать графический интерфейс пользователя KDE, GNOME, или другие, нужно настроить X сервер.

Замечание: Чтобы запустить XFree86™ не из под root, вам потребуется установленный x11/wrapper. Он устанавливается по умолчанию начиная с FreeBSD4.7. В более ранних версиях он может быть добавлен из меню выбора пакетов (Package Selection menu).

Чтобы узнать, поддерживается ли ваша видеокарта, обратитесь к сайту XFree86.

User Confirmation Requested Would you like to configure your X server at this time?

[ Yes ] No

Внимание: Необходимо узнать параметры монитора и информацию о видеокарте. Установкой неправильных параметров можно повредить оборудование. Если у вас нет этой информации, выберите [ No ] и выполните конфигурацию после установки, когда необходимая информация будет собрана. Используя /stand/sysinstall, выберите Configure а затем XFree86. Неправильная настройка X сервера может ``подвесить'' компьютер. Зачастую настройку X сервера рекомендуют производить после завершения установки.

Если у вас есть информация о графической карте и мониторе, выберите [ Yes ] и нажмите Enter для начала настройки X сервера.

Рисунок 2-55. Меню выбора способа конфигурации

Есть несколько путей настройки X сервера. Используйте клавиши навигации для выбора одного из методов и нажмите Enter. Внимательно прочтите все инструкции.

Команды xf86cfg и xf86cfg -textmode могут сделать экран темным и запуститься через несколько секунд. Будьте терпеливы.

Далее описывается использование программы настройки xf86config. Выбор настроек будет зависеть от оборудования системы, так что ваши настройки возможно будут отличаться от тех, что приведены:

Message You have configured and been running the mouse daemon. Choose "/dev/sysmouse" as the mouse port and "SysMouse" or "MouseSystems" as the mouse protocol in the X configuration utility.

[ OK ]



[ Press enter to continue ]

Это говорит, что предварительно настроенный даемон мыши был обнаружен.
Нажмите Enter, чтобы продолжить.

При запуске xf86config отобразит краткое введение:

This program will create a basic XF86Config file, based on menu selections you make.

The XF86Config file usually resides in /usr/X11R6/etc/X11 or /etc/X11. A sample XF86Config file is supplied with XFree86; it is configured for a standard VGA card and monitor with 640x480 resolution. This program will ask for a pathname when it is ready to write the file.

You can either take the sample XF86Config as a base and edit it for your configuration, or let this program produce a base XF86Config file for your configuration and fine-tune it.

Before continuing with this program, make sure you know what video card you have, and preferably also the chipset it uses and the amount of video memory on your video card. SuperProbe may be able to help with this.

Press enter to continue, or ctrl-c to abort.

Нажатие Enter запустит настройку мыши. Следуя инструкциям, выберите ``Mouse Systems'' в качестве протокола мыши и /dev/sysmouse в качестве порта мыши, даже если вы используете PS/2, как показано в примере.

First specify a mouse protocol type. Choose one from the following list:

1. Microsoft compatible (2-button protocol) 2. Mouse Systems (3-button protocol) & FreeBSD moused protocol 3. Bus Mouse 4. PS/2 Mouse 5. Logitech Mouse (serial, old type, Logitech protocol) 6. Logitech MouseMan (Microsoft compatible) 7. MM Series 8. MM HitTablet 9. Microsoft IntelliMouse

If you have a two-button mouse, it is most likely of type 1, and if you have a three-button mouse, it can probably support both protocol 1 and 2. There are two main varieties of the latter type: mice with a switch to select the protocol, and mice that default to 1 and require a button to be held at boot-time to select protocol 2. Some mice can be convinced to do 2 by sending a special sequence to the serial port (see the ClearDTR/ClearRTS options).

Enter a protocol number: 2

You have selected a Mouse Systems protocol mouse. If your mouse is normally in Microsoft-compatible mode, enabling the ClearDTR and ClearRTS options may cause it to switch to Mouse Systems mode when the server starts.



Please answer the following question with either 'y' or 'n'. Do you want to enable ClearDTR and ClearRTS? n

You have selected a three-button mouse protocol. It is recommended that you do not enable Emulate3Buttons, unless the third button doesn't work.

Please answer the following question with either 'y' or 'n'. Do you want to enable Emulate3Buttons? y

Now give the full device name that the mouse is connected to, for example /dev/tty00. Just pressing enter will use the default, /dev/mouse. On FreeBSD, the default is /dev/sysmouse.

Mouse device: /dev/sysmouse

Следующий пункт настройки это клавиатура. В примере показана модель generic 101-key. В качестве варианта можно использовать любое имя, или просто нажать Enter, чтобы принять значение по умолчанию.

Please select one of the following keyboard types that is the better description of your keyboard. If nothing really matches, choose 1 (Generic 101-key PC)

1 Generic 101-key PC 2 Generic 102-key (Intl) PC 3 Generic 104-key PC 4 Generic 105-key (Intl) PC 5 Dell 101-key PC 6 Everex STEPnote 7 Keytronic FlexPro 8 Microsoft Natural 9 Northgate OmniKey 101 10 Winbook Model XP5 11 Japanese 106-key 12 PC-98xx Series 13 Brazilian ABNT2 14 HP Internet 15 Logitech iTouch 16 Logitech Cordless Desktop Pro 17 Logitech Internet Keyboard 18 Logitech Internet Navigator Keyboard 19 Compaq Internet 20 Microsoft Natural Pro 21 Genius Comfy KB-16M 22 IBM Rapid Access 23 IBM Rapid Access II 24 Chicony Internet Keyboard 25 Dell Internet Keyboard

Enter a number to choose the keyboard.

1

Please select the layout corresponding to your keyboard

1 U.S. English 2 U.S. English w/ ISO9995-3 3 U.S. English w/ deadkeys 4 Albanian 5 Arabic 6 Armenian 7 Azerbaidjani 8 Belarusian 9 Belgian 10 Bengali 11 Brazilian 12 Bulgarian 13 Burmese 14 Canadian 15 Croatian 16 Czech 17 Czech (qwerty) 18 Danish

Enter a number to choose the country. Press enter for the next page

1

Please enter a variant name for 'us' layout. Or just press enter for default variant



us

Please answer the following question with either 'y' or 'n'. Do you want to select additional XKB options (group switcher, group indicator, etc.)? n

Теперь переходим к настройке монитора. Не превышайте значений для вашего монитора. Он может быть поврежден. Если у вас есть какие-то сомнения, проводите настройку после того как получите информацию.

Now we want to set the specifications of the monitor. The two critical parameters are the vertical refresh rate, which is the rate at which the whole screen is refreshed, and most importantly the horizontal sync rate, which is the rate at which scanlines are displayed.

The valid range for horizontal sync and vertical sync should be documented in the manual of your monitor. If in doubt, check the monitor database /usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.

Press enter to continue, or ctrl-c to abort.

You must indicate the horizontal sync range of your monitor. You can either select one of the predefined ranges below that correspond to industry- standard monitor types, or give a specific range.

It is VERY IMPORTANT that you do not specify a monitor type with a horizontal sync range that is beyond the capabilities of your monitor. If in doubt, choose a conservative setting.

hsync in kHz; monitor type with characteristic modes 1 31.5; Standard VGA, 640x480 @ 60 Hz 2 31.5 - 35.1; Super VGA, 800x600 @ 56 Hz 3 31.5, 35.5; 8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600) 4 31.5, 35.15, 35.5; Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz 5 31.5 - 37.9; Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz 6 31.5 - 48.5; Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz 7 31.5 - 57.0; High Frequency SVGA, 1024x768 @ 70 Hz 8 31.5 - 64.3; Monitor that can do 1280x1024 @ 60 Hz 9 31.5 - 79.0; Monitor that can do 1280x1024 @ 74 Hz 10 31.5 - 82.0; Monitor that can do 1280x1024 @ 76 Hz 11 Enter your own horizontal sync range

Enter your choice (1-11): 6

You must indicate the vertical sync range of your monitor.


You can either select one of the predefined ranges below that correspond to industry- standard monitor types, or give a specific range. For interlaced modes, the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).

1 50-70 2 50-90 3 50-100 4 40-150 5 Enter your own vertical sync range

Enter your choice: 2

You must now enter a few identification/description strings, namely an identifier, a vendor name, and a model name. Just pressing enter will fill in default names.

The strings are free-form, spaces are allowed. Enter an identifier for your monitor definition: Hitachi

Далее производится выбор видеокарты из списка. Если вы пропустили карту в списке, продолжайте нажимать Enter, и список повторится. Показан только отрывок:

Now we must configure video card specific settings. At this point you can choose to make a selection out of a database of video card definitions. Because there can be variation in Ramdacs and clock generators even between cards of the same model, it is not sensible to blindly copy the settings (e.g. a Device section). For this reason, after you make a selection, you will still be asked about the components of the card, with the settings from the chosen database entry presented as a strong hint.

The database entries include information about the chipset, what driver to run, the Ramdac and ClockChip, and comments that will be included in the Device section. However, a lot of definitions only hint about what driver to run (based on the chipset the card uses) and are untested.

If you can't find your card in the database, there's nothing to worry about. You should only choose a database entry that is exactly the same model as your card; choosing one that looks similar is just a bad idea (e.g. a GemStone Snail 64 may be as different from a GemStone Snail 64+ in terms of hardware as can be).

Do you want to look at the card database? y

288 Matrox Millennium G200 8MB mgag200 289 Matrox Millennium G200 SD 16MB mgag200 290 Matrox Millennium G200 SD 4MB mgag200 291 Matrox Millennium G200 SD 8MB mgag200 292 Matrox Millennium G400 mgag400 293 Matrox Millennium II 16MB mga2164w 294 Matrox Millennium II 4MB mga2164w 295 Matrox Millennium II 8MB mga2164w 296 Matrox Mystique mga1064sg 297 Matrox Mystique G200 16MB mgag200 298 Matrox Mystique G200 4MB mgag200 299 Matrox Mystique G200 8MB mgag200 300 Matrox Productiva G100 4MB mgag100 301 Matrox Productiva G100 8MB mgag100 302 MediaGX mediagx 303 MediaVision Proaxcel 128 ET6000 304 Mirage Z-128 ET6000 305 Miro CRYSTAL VRX Verite 1000



Enter a number to choose the corresponding card definition. Press enter for the next page, q to continue configuration.

288

Your selected card definition:

Identifier: Matrox Millennium G200 8MB Chipset: mgag200 Driver: mga Do NOT probe clocks or use any Clocks line.

Press enter to continue, or ctrl-c to abort.

Now you must give information about your video card. This will be used for the "Device" section of your video card in XF86Config.

You must indicate how much video memory you have. It is probably a good idea to use the same approximate amount as that detected by the server you intend to use. If you encounter problems that are due to the used server not supporting the amount memory you have (e.g. ATI Mach64 is limited to 1024K with the SVGA server), specify the maximum amount supported by the server.

How much video memory do you have on your video card:

1 256K 2 512K 3 1024K 4 2048K 5 4096K 6 Other

Enter your choice: 6

Amount of video memory in Kbytes: 8192

You must now enter a few identification/description strings, namely an identifier, a vendor name, and a model name. Just pressing enter will fill in default names (possibly from a card definition).

Your card definition is Matrox Millennium G200 8MB.

The strings are free-form, spaces are allowed. Enter an identifier for your video card definition:

Далее, производится установка видеорежимов для требуемого разрешения. Обычно используемые значения 640x480, 800x600, и 1024x768, но они зависят от возможностей видеокарты, размера монитора и зрительного комфорта. Выбирая глубину цвета, устанавливайте самое большое поддерживаемое видеокартой значение.

For each depth, a list of modes (resolutions) is defined. The default resolution that the server will start-up with will be the first listed mode that can be supported by the monitor and card. Currently it is set to:

"640x480" "800x600" "1024x768" "1280x1024" for 8-bit "640x480" "800x600" "1024x768" "1280x1024" for 16-bit "640x480" "800x600" "1024x768" "1280x1024" for 24-bit



Modes that cannot be supported due to monitor or clock constraints will be automatically skipped by the server.

1 Change the modes for 8-bit (256 colors) 2 Change the modes for 16-bit (32K/64K colors) 3 Change the modes for 24-bit (24-bit color) 4 The modes are OK, continue.

Enter your choice: 2

Select modes from the following list:

1 "640x400" 2 "640x480" 3 "800x600" 4 "1024x768" 5 "1280x1024" 6 "320x200" 7 "320x240" 8 "400x300" 9 "1152x864" a "1600x1200" b "1800x1400" c "512x384"

Please type the digits corresponding to the modes that you want to select. For example, 432 selects "1024x768" "800x600" "640x480", with a default mode of 1024x768.

Which modes? 432

You can have a virtual screen (desktop), which is screen area that is larger than the physical screen and which is panned by moving the mouse to the edge of the screen. If you don't want virtual desktop at a certain resolution, you cannot have modes listed that are larger. Each color depth can have a differently-sized virtual screen

Please answer the following question with either 'y' or 'n'. Do you want a virtual screen that is larger than the physical screen? n

For each depth, a list of modes (resolutions) is defined. The default resolution that the server will start-up with will be the first listed mode that can be supported by the monitor and card. Currently it is set to:

"640x480" "800x600" "1024x768" "1280x1024" for 8-bit "1024x768" "800x600" "640x480" for 16-bit "640x480" "800x600" "1024x768" "1280x1024" for 24-bit

Modes that cannot be supported due to monitor or clock constraints will be automatically skipped by the server.

1 Change the modes for 8-bit (256 colors) 2 Change the modes for 16-bit (32K/64K colors) 3 Change the modes for 24-bit (24-bit color) 4 The modes are OK, continue.



Enter your choice: 4

Please specify which color depth you want to use by default:

1 1 bit (monochrome) 2 4 bits (16 colors) 3 8 bits (256 colors) 4 16 bits (65536 colors) 5 24 bits (16 million colors)

Enter a number to choose the default depth.

4

Наконец, настройки нужно сохранить. Убедитесь что ввели /etc/XF86Config в качестве места хранения настроек.

I am going to write the XF86Config file now. Make sure you don't accidently overwrite a previously configured one.

Shall I write it to /etc/X11/XF86Config? y

Если настройка прервалась, вы можете запустить настройку опять, выбрав [ Yes ] когда появится следующее сообщение:

User Confirmation Requested The XFree86 configuration process seems to have failed. Would you like to try again?

[ Yes ] No

Если у вас проблемы с настройкой XFree86, выберите [ No ], нажмите Enter и продолжайте процесс установки. После установки вы можете использовать xf86cfg -textmode или xf86config для получения доступа к утилитам настройки в режиме командной строки под root. Это дополнительный метод настройки XFree86, описанный в Гл. 5. Если вы решите не настраивать XFree86 сейчас, следующим появится меню выбора пакетов.

Настройкой по умолчанию, позволяющей перезагрузить сервер, является комбинация клавиш Ctrl+Alt+Backspace. Эта комбинация может быть применена если что-то не так с установками сервера, она позволяет предотвратить повреждение оборудования.

Настройкой по умолчанию, позволяющей переключать видео режимы во время работы X, является комбинация клавиш Ctrl+Alt++ or Ctrl+Alt+-.

После запуска XFree86 вы можете настроить высоту, ширину и центровку изображения используя xvidtune.

Будут выданы предупреждения, что неверные установки могут повредить ваше оборудование. Прислушайтесь к ним. Если вы сомневаетесь в чем-то, не делайте этого. Вместо этого, используйте настройки монитора для подстройки его под X Window. Вид экрана может несколько отличаться при переключении обратно в текстовый режим, но это лучше, чем повреждение оборудования.

Прочитайте справочник xvidtune(1) перед тем как производить какие-либо настройки.

После успешной настройки XFree86, будет предложен выбор десктопа по умолчанию.


Содержание раздела